 |
|
|
|
Optomized For
|
|
  |
|
|
 |
|
|
|
W800
supported Cables:
|
|
|
Official Total Multiserver 2 in 1 cable or the Uc-10 Cruicer
Cable. |
|
Cable Dcu-60 Original FastPort. Please notices
that it ONLY supports Firmware upgrade and/or Operator
debranding. |
| The original
cable Dcu-60 FastPort IS NOT SUPPORTED to unlock
these telephones. |
|
In order to unlock these new telephones with FastPort
Connector you must use described Usb-ftdi cables described
above. |
|
|
|
Downloading: |
Total Multiserver 2.15
|
|
The file when decompressing generates a folder called
Multiserver
inside are the
archives: |
|
client.exe
- Total Multiserver Software
2.15 |
|
Client.XML
- do not touch this file, it is necessary for
the correct operation of program. |
| |
|
 |
| In the
folder
TotalMultiserver 2.15 ,
press "client.exe" ,
to open the software
: |
 |
|
|
WARNING: before
initiating the update make a backup of your agenda, mms, sms,
tasks, notes. All the configuration and archives in the phone
will be erased. Be sure to have a full battery and to cleare the
SIM card from your phone. Get your Antivirus and screen saver
deactivated. Got an ADSL Connection to Internet.
In the
folder
TotalMultiserver 2.15,
press "client.exe" , software will be
opened :
|
1
-
Type in the Login
and Pass, press
"Info" . In the white box where all the
information during in
flashing appears, it is like the picture
state and it informe you about the processes.
|
|
2
- Select
the model
SonyEricsson -
K750i/D750i/W800i |
|
- Select
the box
"Flash Menu" |
|
4 - Select
the necessary archives:
In the square
Select FIRMWARE File
, press on the folder and select the file:
"W800i R1BC002 ZONE 1 Eu-emea-us.75s" "
The file are
located in the folder: Total 2.15
/Files/SonyEricsson W Series/W800i -
W800c/2006-03-30 - W800 R1BC002 NETWORK CID36/1. -
75S FIRMWARE Files
In the square
Select DEFAUT LANGUAGE File
, press on the folder and select the file
:
"W800i R1BC002 EU4
EN_DA_FI_IS_NO_SV.75D"
The file are
located in the folder: Total 2.15
/Files/SonyEricsson W Series/W800i -
W800c/2006-03-30 - W800 R1BC002 NETWORK CID36/4. -
75D |
|
|
|
5
- Mark the square
"Disable/Remove
Camera Shooter Sound". |
|
6
- Select
the COM port
your cable is connected to.. Then select the speed:
Depending on
the used cable
. Mark
the
DTR and RTS
squares. Note: If your phone is not detected
after pressing power on, uncheck the "DTR" & "RTS"
boxes and repeat the process. |
|
7
- Press
"Program Files to
Phone Memory" |
|
8
- Pay
attention at the white box, when it request
that you'll presses ON
button of the phone. Wait for the message
Flash prosess finished sucsessfully appears. |
|
|
 
|
Annonser: |
 |
|
|
SonyEricsson
W Series 
W800i
- W800c 